'Other' Constructional and Allied Systems Info & Downloads
Construction Jeep(1)
Construction Jeep(2)
Construction Truck(1)
Construction Truck Trailer
Construction Cultivate Tractor
Educational Toy
These Construction Jeeps and Trucks/Trailers are all very similar and were probably all made by the same and/or successor companies. They were made in Japan. Dates uncertain but possibly from the 1960s to the 1970s, but could be earlier and/or later.
Construction Jeep(1)
Manufacturer / Distributor
Marusan Shoten Ltd., Tokyo, Japan
Info from the Metal Constructional Systems Database for CONSTRUCTION JEEP [1] (Ref:CJP1)
Hole pitch <12.7mm
Japan
after 1945
Steel
3x.6 (some significant doubt)
push fit (see comment *1)
----
--
17
10.0 (multiples of value shown, including half.)
3.2
3.4 (see comment *2)
3.0
Nuts: square
Bolts: round (slotted)
(see comment *3)
Steel with a Brass finish
6.0
5.2
Comments
Lid has blue Jeep towing a simple Mobile Crane. Set has toy Jeep with constructional parts to make add-ons. Thread, & N&B data, need checking. *1 Push fit rubber Road Wheels. *2 Eyeletted Pulleys. *3 Hex shown in MCS.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for CONSTRUCTION JEEP [1] do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.
Construction Jeep(2)
Manufacturer / Distributor
Daiya, Japan
Info from the Metal Constructional Systems Database for CONSTRUCTION JEEP [2] (Ref:CJP2)
Hole pitch <12.7mm
Japan
known in 1967
Steel
push fit (see comment *1)
----
--
17
10.0 (multiples of value shown, including half.)
3.3 (see comment *2)
2.8
Nuts: square
Bolts: round (slotted)
with a Nickel plated finish
6.0
Comments
Lid has green Jeep towing a simple Trailer. Set has Jeep & parts similar to CONSTRUCTION JEEP [1] but Flanged Plate has square corners & is red not blue. Differemt maker, as CONSTRUCTION TRUCK [1]. *1 Push fit rubber Wheels. *2 Mean; 3.1 also reported.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for CONSTRUCTION JEEP [2] do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.
Construction Truck(1)
Manufacturer / Distributor
Daiya, Japan
Info from the Metal Constructional Systems Database for CONSTRUCTION TRUCK [1] (Ref:CTK1)
Hole pitch <12.7mm
Japan
Steel
----
--
---
Nuts:
Bolts:
`
Comments
Lid has Truck model with ladder on it. Set similar in style to CONSTRUCTION TRUCK TRAILER but different toy Lorry (called New Chevrolet Truck on model leaflet cover) & some different parts.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for CONSTRUCTION TRUCK [1] do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.
Construction Truck Trailer
Manufacturer / Distributor
Unknown, Japan - but could be - Daiya, Japan
Info from the Metal Constructional Systems Database for CONSTRUCTION TRUCK TRAILER (Ref:CTK0)
Hole pitch <12.7mm
Japan
after World War Two
Steel
push fit
----
--
14
10.0 (multiples of value shown, including half.)
3.1
---
Nuts: hexagonal
Bolts: round (slotted)
6
5
Comments
Similar in style to CONSTRUCTION JEEP but toy flatbed Lorry & some different parts. Model leaflet has name Construction Truck on its cover.
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for CONSTRUCTION TRUCK TRAILER do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Below there are manuals/leaflets which can be downloaded by clicking on the appropriate image.
Construction Cultivate Tractor
Manufacturer / Distributor
Unknown, Japan - but could be - Daiya, Japan
Info from the Metal Constructional Systems Database for CONSTRUCTION CULTIVATE TRACTOR (Ref:CTR)
Hole pitch <12.7mm
Japan
Steel
push fit
----
--
16
10.0 (probably)
Nuts: square
Bolts: round (slotted)
`
Comments
Set has toy Tractor model with parts (like CONSTRUCTION JEEP [1] & some special) to build implements for Tractor.
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for CONSTRUCTION CULTIVATE TRACTOR do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.
Educational Toy
Manufacturer / Distributor
Daiya, Japan
Info from the Metal Constructional Systems Database for EDUCATIONAL TOY (Ref:E Y)
Hole pitch <12.7mm and Matchbox & similar
Japan
Metal
1/8W
no boss
----
--
16
10.0
3.0
Nuts: square
Bolts: round (slotted)
with a Nickel plated finish
`
Comments
Entry based on one set by Daiya with strip & other parts reminiscent of their Matchbox set.
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for EDUCATIONAL TOY do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.